Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure
Zortrax Inventure

Zortrax Inventure

5902280820437
Out of stock
zł9,026.97
Tax included

Zortrax Inventure

Zortrax Inventure

3D printer designed for professionals

Zortrax Inventure is a dual-extrusion 3D printer working in the LPD Plus technology. An enclosed heated printing chamber significantly reduces the warping of ABS-based filaments. Built-in HEPA filter prevent 3D printing fumes from getting out of the chamber. Zortrax Inventure can 3D print high-temperature ABS-based materials like Z-ULTRAT PLUS with Z-SUPPORT Plus, and PVA-based filament designed to work at nearly 245 ° C (505 ° F). Water-soluble support system enables stacking baskets. This way Zortrax Inventory can work with a bigger single-extrusion device. That's what makes it is a unique desktop machine for professionals, ranging from medicine, through engineering, to industrial design.

Zortrax Inventure has a system of soluble supports, a closed heating chamber and a built-in HEPA filter. All these features along with access to the comprehensive Zortrax ecosystem make Zortrax Inventure a Plug & Play printer capable of printing parts with advanced internal architecture, movable mechanisms, and short-run production.

Double extrusion

Inventure 3D prints of two filaments simultaneously: one material prints the model and the other is a water-soluble support material. Thanks to the extruder's equipment in two nozzles, it was possible to reduce the weight and size of the entire mechanism.

Closed chamber Print

The work platform is practically isolated from the surrounding environment to provide fully controlled 3D printing conditions.

Built-in HEPA filter

The HEPA filter catches more than 99% of the particles released during 3D printing, including those below 100 nm.

Intelligent cartridges

The material dedicated to Zortrax Inventure is available in the form of easily exchangeable cartridges, which inform users about the type of material and its potential lack.

Soluble support material

Z-SUPPORT Premium is a support material based on BVOH, which is completely soluble in water. The Zortrax DSS station is a device that removes supports. The station introduces water into the circulation at the optimum temperature to achieve the best level of dissolution.

Remove the model from the work tray and immerse it in the water inside the Zortrax DSS.

Pull the model out of the Zortrax DSS station. In some cases it will be necessary to use the brush included in the kit to remove the remaining support material.

Carefully dry the model when the supporting material is already dissolved. And that would be enough. Support material no longer exists.

Zortrax Inventure

  • LPD Plus Technology
  • Dual-extrusion
  • 3D prints high-temperature ABS-based filaments with PVA support
  • PVA support filaments soluble in water
  • Enclosed, heated printing chamber
  • Built-in HEPA filter
  • Short-series production ready
  • Prints movable mechanisms in one go

Zortrax Inventure

PVA soluble support filament, water can almost entirely remove support structures from between tightly interlocked parts. That's why Zortrax Inventure comes in handy when you need 3D printing for prototyping in engineering.

It's been designed around an enclosed, heated printing chamber to 3D print highly resilient ABS-based filaments with PLA-like dimensional accuracy. We have also introduced Z-SUPPORT Plus, a unique high-temperature PVA material designed to work with Z-ULTRAT Plus, one of the most resilient ABS-based filaments in our range.

That's why Zortrax Inventure improves your rapid prototyping capabilities in following ways. You can cut on time needed for support removal and assembling the prototypes of moving mechanisms. You can also use resilient materials for your prototypes to increase the number of tests performed with one model. That's what makes Zortrax Inventure perfect for printing models in 3D with prototyping moving mechanisms in mind.

Zortrax Inventure - Specification

Device features

Build volume
135 x 135 x 130 mm (5.3 x 5.3 x 5.1 in)
Material container
Cartridge
Material diameter
1,75 mm (0.069 in)
Nozzle diameter
0,4 mm (0.016 in)
Support
Dissolvable – printed with a different material than the model
HEPA filter
Yes
Material detection sensor
Yes
Chip with information about material (type, color, consumption)
Yes
Extruder
Printing with the model and the support material
Connectivity
SD card (included)
Available materials
Model materials (Z-PETG, Z-PLA, Z-SEMIFLEX, Z-ULTRAT Plus) and support materials (Z-SUPPORT, Z-SUPPORT Plus)
In the box
3D printer, SD card, cartridge with model material, cartridge with support material, quick start guide, waste container, cartridge knob, power cable, build tray (spare), 5 build trays

Weight and physical dimensions

3D printer (W x D x H)
350 x 345 x 405 mm (13.8 x 13.6 x 15.9 in)
Shipping box
460 x 450 x 520 mm (18.1 x 17.7 x 20.5 in)
Shipping weight
26 kg (57.3 lbs)
Printer weight*
21 kg (46.3 lbs)

Additional information

Each delivered printer may have worked up to 50 hours during the quality control test prints.

Printing

Technology
LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures
Layer resolution
90-290 microns
Minimal optimal wall thickness
800 microns
Minimal wall thickness
400 microns
Resolution of a single printable point
X/Y axes: 400 microns Z axis: 90-200 microns
X/Y positioning accuracy
1.5 micron
Z-axis single step
1.25 micron
Maximum printing temperature (extruder)
310 ˚C (590 °F)
Heated chamber
Yes
Maximum chamber temperature
90 ˚C (194 °F)
Ambient operation temperature
15 - 30 ˚C (59 - 86 °F)
Storage temperature
0 - 35 ˚C (32 - 95 ˚F)
AC input
110 V ~ 4 A 50/60 Hz 240 V ~ 1.7 A 50/60 Hz
Power supply parameters
24 V DC @ 14 A, 320 W
Maximum power consumption
300 W

Software

Software bundle
Z-SUITE
Supported file types
.stl, .obj, .dxf, .3mf
Supported operating systems
Mac OS X / Windows 7 and newer versions
* The weight includes: the device with the build tray and the power cable installed. It does not contain the cartridges with the materials.

Napisz do nas i zapytaj o drukarkę Zortrax Inventure

Contact us

optional
No reviews

Please be advised that our online store uses cookie technology and at the same time does not automatically collect any information, except for the information contained in these files (so-called "cookies").